24-480VAC to 3-32VDC Single Phase DC-AC SSR 60A Solid State Relay

Basic Info

Model NO.	SSR-1 DA60
Action Principle	Electronic Type
Size	Miniature
Type	Electric Parameter Relay
Name	Solid State Relay
Load Voltage	24-480VAC
Control Current	5-20mA
Transport Package	Standard Packing
Specification	customized
Trademark	AKMAN
Origin	Zhejiang China
Production Capacity	10000PCS/Week

Product Description

24-480VAC To 3-32VDC Single Phase DC-AC SSR 60A Solid State Relay
Technical Parameters

Model	SSR-1 D4860 DC Control AC
Control Voltage	3-32VDC
Min Control Current	5mA
Max Control Current	20mA
Load Voltage	24-480VAC
Load Current	60A
Insulation Resistance	1000M Ohm/ 500VDC
Off Leakage Current	<=5mA
On Voltage	<=1.6V
On-off Time	<=10ms
Ambient Temperature	-30~+70 ºC
Mounting Method	Screw fixed

Type-choosing of solid state relays
1.Input Please refer to the input character curve and input voltage range of solid state relay, and choose the input specification that
you need.

2.Output The output voltage of solid state relay usually means the steady state voltage in the output terminal of relay. And the transient
voltage means the max transient voltage of the output terminal of relay under off state that will not be arc over or lose blockout function.
During operation, please make sure that the peak value of max voltage on the relay's output terminal should lower than the transient
voltage value. When switching AC inductive load, like switch on single-phase (three-phase) electric machine, the output terminal of relay
may appear transient voltage that is two times of peak value of power supply. For this kind of load, please remain a certain allowance for
output voltage when select solid state relays.

3.The output current of solid state relays usually means steady state current that flow through the output terminal of relay. Because
of the surge current caused by inductive load and condensive load and surge that caused by power supply itself, please remain a certain
allowance for output current when select solid state relays, under normal temperature, please satisfy the formula: steady state working
current of actual load=the rated output current of selected product reduction ratio, it will improve the reliability of product(refer to table 1).
Notice The smaller value of reduction ratio of single-phase and three-phase electric machine in the table corresponding to the mass
load. The best output load frequency of AC solid state relay list in this manual is below 60Hz (such as power frequency 50Hz).

 

Product details

 

Q1.Are you a factory or trading company ?
A:We are a factory founded in 2010 and have over 10 years'OEM and international trading experience .Q2.What's your main product?
A:Our main products are time Relay, voltage Relay, motor protector, current relay,solid state relayQ3.Do you accept OEM or ODM?
A:Of course.Q4.What's your main payment term?
A:T/T ,LC ,D/P.Q5.Any quality guarantee or after-sales service?
A:All the products have 2 years' Guarantee. If any quality complaint , we will give out solution within 5 daysQ6.Can sample fee be returned back to me ?
A:Sample amount can be deducted from your bulk order payment when order quantity is over 1000 pieces at the first time.