100A Magnet Immunity 500mt Miniature 2 Pole High Power Latching Motor Relay for Smart Meter

Basic Info

Model NO.	IM-M1001D
Theory	Electromagnetic Relay
Usage	Household Appliances Relay, Industrial Control, Energy Meter, Smart Grid
Phase	1
Electricity Type	Ac
Number of Pole	1
Load	High Power Relay
Protective Characteristics	Enclosed Rlay
Action Principle	Electromagnetic Type
Size	Miniature
Type	Electric Parameter Relay
Product	Motor Control 2 Pole High Power Latching Relay
Rated Load	100A, 250VAC
Coil Voltage	6~36VDC
Contact Form	2A/2b
Contact Material	Agsno2
Color	Black
Transport Package	Cartons/Pallet
Specification	26.5*23.5*15mm
Trademark	IVY
Origin	Zhejiang, China
HS Code	8536411000
Production Capacity	5, 000, 000.00/ Year

Product Description

Basic Parameters	Dimension(mm)		29×24.5×27.1
	Weight ( g )		≈36g
	Ambient Temperature		-45~+85ºC
Contact Parameters	Contact Material		AgSnO2
	Contact Arrangement		2A/2B
	Contact Resistance		<1.0mΩ(DC12V/1A)
	Contact Load		250VAC,100A
	Max. Switching Current		100A
	Electrical Life		10000 cycles
	Mechanical Life		80000 cycles
Performance Parameters	Rated Voltage		12V(Advise pulse width 60-80ms)
	Max. Driving Voltage		24V(Advise pulse width 20ms)
	Motor Resistance		32(1±15%)Ω
	Vibration		1.5mm(DA),10~ 50Hz
	Shock		1000m/s²,(100g)
	Surge Current		6000A/10ms
	Insulation Resistance		>1000MΩ(500VDC)
	Dielectric Strength	Motor to Contact	>4000VAC, 1min
		Across Open Contact	>2000VAC, 1min
		Pole to Pole Contact	>4000VAC, 1min
	Picking-up Time		<=40ms
	Release Time		<=40ms

Cautions of Latching Relay:

1.Suggestions of relay's input (1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,you can change it by one pulse.If double coil then it's necessary to confirm "-+-" or "+-+"before leaving the our factory.(2)Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance, if 1.5times or 2 times of value or lower driving condition plz confirm with our engineer.
(3)Relays'contact status may be changed during transportation or installation due to impact of external force,
therefore please reset to the required status. 2.Suggestions of relay's output
(1)When choosing the relay with hard connection,please avoid the external force on load terminals during or afterthe installation.(2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection isfastened and prevent relay from damages or other safety problems due to temp. Rise..(3)The sampling signal wires of products are limited, please do not pull or torque during installation.